Will an 06 motor fit in an 04?

[ALL_MOUNTAIN]

My 04 motor is shot, the crank wiggles and there are metal chunks in the oil plug. I can find a 06 motor but it looks a little different where the carb mounts up. Will this swap work or is there something else I should look at dropping in there?

[Doc]

The Service Manual hasn't changed over the years so I'd assume the motor hasn't. Thats my best guess though and I'm not 100% sure...only 99.9%

[jmkjr72]

with any swap even if it is from the sam make and modle i recomend getting as much of the donor scoot as possible
this is more important in mor complex swaps but there could be slight changes that dont warrant a new service manual ie new intake enhanced eletronics wireing changes
and if it was fi you must always get the wire harness and computer but this doesnt apply here

[ALL_MOUNTAIN]

thanks for the great information. i let the motor slip away so it's back to the search.

[Silver Bullet]

My 2009 and 2005 were identical except for the minor seat styling (although still interchangeable). For model years 2004 vs 2006 I did a quick Yamaha micro fiche P/N check, cylinder head, manifold and carb are the same part for both years. So all years, all the same.

[ALL_MOUNTAIN]

thanks a lot for that i'll get to work

[Doc]

BTW, How much did the want for the '06 motor...just curious.

[ALL_MOUNTAIN]

the 06 motor was $300 shipped. it was jst the motor no starter or anything else.